How do I prime the coils in avidvape tanks?

Hey there, vape enthusiasts! I'm a supplier for AvidVape, and I've been getting a bunch of questions lately about how to prime the coils in AvidVape tanks. So, I thought I'd put together this blog post to share some tips and tricks that I've picked up over the years.

First off, let's talk about why priming your coils is so important. When you first install a new coil in your AvidVape tank, the wicking material inside is dry. If you fire up your vape right away, the dry wick can burn, which will not only give you a nasty, burnt taste but also shorten the lifespan of your coil. Priming the coil ensures that the wick is saturated with e - liquid before you start vaping, which helps to prevent dry hits and extends the life of your coil.

Step - by - Step Guide to Priming AvidVape Coils

Step 1: Prepare Your Coil and Tank

Before you start priming, make sure you have a new AvidVape coil and your tank ready. Remove the old coil from the tank if there is one. Take your new coil and inspect it carefully. Look for any signs of damage or loose parts. If everything looks good, it's time to move on to the next step.

Step 2: Apply E - Liquid to the Coil

Take your bottle of e - liquid and gently apply a few drops of it directly onto the exposed wicking material of the coil. You don't need to drench it; just a few drops on each side of the wick will do the trick. This helps to start the saturation process.

Step 3: Install the Coil in the Tank

Once you've applied the e - liquid to the coil, carefully install it into your AvidVape tank. Make sure it's screwed in tightly but don't over - tighten it, as this can damage the coil or the tank.

Step 4: Fill the Tank with E - Liquid

After the coil is installed, it's time to fill the tank with e - liquid. Slowly pour the e - liquid into the tank, being careful not to get any in the center tube (the part where the vapor travels to the mouthpiece). Fill the tank up to the recommended level, which is usually marked on the side of the tank.

Step 5: Let the Coil Soak

This is a crucial step. After filling the tank, let the coil soak in the e - liquid for at least 5 - 10 minutes. This gives the wick enough time to fully absorb the e - liquid. You can give the tank a gentle shake every now and then to help speed up the saturation process.

Step 6: Take a Dry Pull

Before you fire up your vape, take a few dry pulls (inhale through the mouthpiece without pressing the fire button). This helps to draw the e - liquid further into the wick.

Step 7: Start Vaping

Once you've completed all the above steps, it's finally time to start vaping. Start with a low wattage setting and gradually increase it as you get used to the new coil. This will help to prevent any dry hits or burnt tastes.

Tips for Priming Different AvidVape Tanks

AvidVape LEGEND 5000 Puffs Vape

The AvidVape LEGEND 5000 Puffs Vape is a popular disposable vape from AvidVape. While it doesn't have a traditional tank that you need to refill and prime the coil in the same way as a regular tank, it's still important to let it sit for a few minutes after you first open it. This allows the e - liquid to settle and the coil to get a bit of saturation. If you notice a dry hit right away, try taking a few dry pulls to see if that helps.

AvidVape Plump 8000 Puffs Vape

The AvidVape Plump 8000 Puffs Vape is another great option. When priming the coil in this device, make sure to apply a bit more e - liquid to the wick during the initial step. The larger capacity of this vape means that the wick needs to be well - saturated to handle the higher volume of e - liquid. Also, give it a bit more time to soak, around 10 - 15 minutes, to ensure a smooth vaping experience.

AvidVape M82 7500 Puffs Vape

For the AvidVape M82 7500 Puffs Vape, pay close attention to the way you install the coil. Make sure it's centered properly in the tank to ensure even saturation. After filling the tank, give it a gentle swirl to help the e - liquid distribute evenly around the coil. And as always, let it soak for at least 10 minutes before you start vaping.

Common Mistakes to Avoid

• Not Soaking Long Enough: This is one of the most common mistakes. If you don't let the coil soak long enough, you're likely to get dry hits. Always give it the recommended time to soak.
• Over - priming: While it's important to prime the coil, over - applying e - liquid can also cause problems. Too much e - liquid can flood the coil, which can lead to gurgling sounds and leaking.
• Using the Wrong E - Liquid: Make sure you're using the right type of e - liquid for your AvidVape tank. Some coils are designed for specific VG/PG ratios, and using the wrong one can affect the performance of the coil.

Conclusion

Priming the coils in your AvidVape tanks is a simple but important process that can make a big difference in your vaping experience. By following the steps outlined in this blog post and avoiding common mistakes, you can ensure that your coils last longer and that you get the best possible flavor from your e - liquid.

If you're interested in purchasing AvidVape products in bulk for your business, I'd love to have a chat with you. Whether you're a vape shop owner, a distributor, or just looking to stock up on some great vapes, I can offer you competitive prices and excellent service. Don't hesitate to reach out, and let's start a conversation about your procurement needs.

References

• Personal experience as an AvidVape supplier.
• AvidVape product manuals and guidelines.